The PRIMO5 is ideally suited to the rigorous demands of water quality professionals who will appreciate the practicality of the clear, easy to read LCD for demonstrating the before and after results of conditioning and filtration systems.
Key features
- Robust pocket-sized tester
- Direct probe connection
- Automatic calibration
- Automatic Temperature Compensation
Operation and maintenance are straightforward
Operate
- The Primo5 uses a single button at the top of the meter.
- Press the button once and the meter is powered and ready for use.
Calibrate
- Simply press and hold the button for a few seconds and the meter automatically enters calibration mode.
- Open a sachet of Hanna calibration solution and dip the probe directly into the sachet.
- Within seconds the meter recognises the calibration solution and will calibrate itself.
Temperature is compensated automatically to ensure the readings are consistent with standard or reference temperature.
Supplied with
- Batteries
- Instructions
- 1 x 20 mL sachet of HI-70031 calibration solution
-
Range 0 to 1999 µS/cm Resolution 1 µS/cm Accuracy ±2% F.S. Calibration Solution HI 70031P Calibration automatic, at 1413 µS/cm Temperature Compensation Automatic, 0 to 60°C (32 to 140°F), ß=2%/°C Battery Type / Life 2 x 1.5V / approx. 200 hours; auto-off after 5 minutes of non-use Environment 0 to 50°C (32 to 122°F); RH max 95% Dimensions 180 x 50 x 25 mm (7.1 x 2.0 x 1.0") Weight 50 g (1.8 oz.)
