JENCO 6308PT pH, Temperature In-line Analyzer

Harga :

Rp. 1 / unit

Merk :

JENCO

Pembelian Minimal :

1 unit

Pembelian Maksimal :

1 unit

Pengiriman :

1 hari sejak pembayaran

Lokasi :

Jawa Barat - Bekasi

Dilihat :

131 Kali

Update Terakhir :

03-02-2016 15:30

Dapatkan Spesifikasi Harga JENCO 6308PT pH, Temperature In-line Analyzer Produk Terbaik dari Andalan Prima General Supplier,Test & Measuring Instrument,Laboratory Equipment , Glassware & Chemical

Detail Produk

Description

1/4 DIN panel mount pH single parameter analyzer with electrode efficiency display function. Features pH linear or antilog transmitter output, hysteresis control and uninterrupted operation during pH calibration. Has one 4-20mA output, 5 relays and a RS-485 communications interface. Graphical display. 115/230V AC. CE Approved.

Bright, graphical LCD display, 1.5 x 2.25
Simultaneous measurement and analysis
1/4 DIN watertight, ip65 rated enclosure
Reversible & isolated 4 to 20ma output with adjustable bandwidth
Continuous controller / relays operation during calibration
4-digit password security protection
Programmable set point hysteresis
Automatic temperature compensation
CE approved
Built in ISO9001 certified facility
Membrane keypad with audio feedback
Power down, non-volatile memory backup
RS-485 output
Multiple spst on/off relays
Embedded self diagnostic program
High 50/60 hz noise rejection

Specifications

	RANGE	RESOLUTION	ACCURACY
pH	-2.00 to 16.00	0.01 pH	0.1% ± 1 lSD
Temp.	-10.0 to 120 °C	0.1 °C	±0.3 °C

pH
- Temperature compensation range: -10.0 to 120.0 °C
- Buffer recognition: 4.01,7, 10.01 / 4.00,6.86, 9.18
- Buffer temperature range: 0 to 60.0 °C
- Electrode slope compensation: ±30% of ideal slope
- Electrode offset compensation: ±100 mV
- Input impedance: Greater than 10 exp(13) ohms
- Calibration auto end point sensing: Yes
Output Relays
- pH: 2programmable high or 2 low
- Temperature: 1programmable high or 1 low
- Control type: On/off
- Relay output (resistive load only): 5amps at 115 VAC 2.5 amps at 230 VAC
- Relay set point hysteresis: User programmable
Current Output
- Type: Isolated 4 to 20 mA
- Range: Selectable zero, & span
- Accuracy: ±0.02mA
- Isolated voltage: 500 VDC
- Maximum load: 500 w
General
- ATC sensor: Thermistor 10kilo ohms at 25 c
- Security protection: 4digit password
- Keypad: Audio feedbackup
- Communication: RS-485
- Pre-amplifier voltage: ±5 VDC,20mA max output
- Power source: 115/230 VAC, 50/60hz
- Dimensions: 1/4 DIN, depth 148mm
- Weight: 950 gm

Andalan Prima

JENCO 6308PT pH, Temperature In-line Analyzer

Detail Produk

Description

Specifications

pH

Output Relays

Current Output

General

Permintaan Penawaran

Kategori Produk

Link