JENCO 6309POT pH, ORP, Temperature In-line Analyzer

Harga :

Rp. 1 / unit

Merk :

JENCO

Pembelian Minimal :

1 unit

Pembelian Maksimal :

1 unit

Pengiriman :

1 hari sejak pembayaran

Lokasi :

Jawa Barat - Bekasi

Dilihat :

226 Kali

Update Terakhir :

03-02-2016 15:32

Dapatkan Spesifikasi Harga JENCO 6309POT pH, ORP, Temperature In-line Analyzer Produk Terbaik dari Andalan Prima General Supplier,Test & Measuring Instrument,Laboratory Equipment , Glassware & Chemical

Detail Produk

Description

pH & ORP analyzer,1/4 DIN panel mount IP-65 case. Features 2 pH and 2 ORP fully programmable relays and one for temperature. RS-485 interface, password protected with individual ID's. 4-20 mA analog output is fully programmable, assignable & reversible. Graphical display. Tinned lead connectors. CE Approved.

Ph/ORP/temp. measurement & control
Display pH electrode efficiency
Reversible & isolated 4~20ma output
RS-485 output
Bumpless calibration
Graphic LCD dispaly,128 x 64with backlight
Membrane switch with audio feedback
Auto temp. compensation
High 50/60 hz noise rejection
Pipe/wall/panel mounting
1/4 DIN watertight enclosure
One programmable relay for temp.
CE approved
Programmable linear/ ORP current output or programmable linear/ anti-logarithmic current output

Specifications

	RANGE	RESOLUTION	ACCURACY
pH	-2.00 to 16.00	0.01pH	0.1% ± 1 LSD
ORP(Absolute)	-2500 to 2500mV	1mV	±0.1% rdg ± 1mV
ORP(Relative)	-6499 to 6499mV	1mV	±0.1% rdg ± 1mV
Temp.	-10.0 to 120 °C	0.1°C	± 0.3°C

pH
- Temperature compensation range: -10.0 to 120.0 °C
- Buffer recognition: 4.01,7, 10.01 / 4.00,6.86, 9.18
- Buffer temperature range: 0 to 60.0 °C
- Electrode slope compensation: ±30% of ideal slope
- Electrode offset compensation: ±100 mV
- Input impedance: Greater than 10 exp(13) ohms
- Calibration auto end point sensing: Yes
Output Relays
- pH: 2programmable high or 2 low
- ORP: 2programmable high or 2 low
- Temperature: 1programmable high or 1 low
- Control type: On/off
- Relay output (resistive load only): 5amps at 115 VAC 2.5 amps at 230 VAC
- Relay set point hysteresis: User programmable
Current Output
- Type: Isolated 4 to 20 mA
- Range: Selectable zero, & span
- Accuracy: ±0.02mA
- Isolated voltage: 500 VDC
- Maximum load: 500 w
General
- ATC sensor: Thermistor 10kiloohms at 25 c
- Security protection: 4digit password
- Keypad: Audio feedbackup
- Communication: RS-485
- Pre-amplifier voltage: ±5 VDC,20mA max output
- Power source: 115/230 VAC, 50/60hz
- Dimensions: 1/4 DIN, depth 148mm
- Weight: 950 gm

Andalan Prima

JENCO 6309POT pH, ORP, Temperature In-line Analyzer

Detail Produk

Description

Specifications

pH

Output Relays

Current Output

General

Permintaan Penawaran

Kategori Produk

Link