MEMMERT Cooled vacuum oven VO200cool
Pengiriman :
3 hari sejak pembayaran
Lokasi :
Jawa Barat - Bekasi
Update Terakhir :
02-06-2016 14:53
Dapatkan Spesifikasi Harga
MEMMERT Cooled vacuum oven VO200cool Produk Terbaik dari
Andalan Prima General Supplier,Test & Measuring Instrument,Laboratory Equipment , Glassware & Chemical
Detail Produk
Properties
Control of standard components
| Temperature |
temperature measured through 4-wire Pt100 sensor |
| Vacuum |
digital electronic pressure control through solenoid valves |
| Vacuum |
setting accuracy 1 mbar |
| Vacuum |
adjustment range from 5 mbar to 1100 mbar - digital (LED) |
| Vacuum |
rapid air intake for door opening (door is blocked under vacuum ) - programme reactivation at stored values |
| Vacuum |
vacuum drying process (vacuum cycles) is continued after power failure |
| Vacuum |
one programmable, digitally controlled inlet for air |
| Controller |
digital display of all set parameters, such as temperature, weekdays, time, pressure, programe status and set-up values |
| Controller |
LED-symbol for thermoshelf in operation |
| Controller |
digital display of actual temperature |
| Timer |
digital 7-day programme timer with real time clock, precise minute setting, for one set value or start of ramp operation |
| Timer |
integrated timer for tempering and pressure (vacum) profiles of up to 40 ramps, parameters time, pressure and temperature (setpoint dependent) individually adjustable for each segment from 1 min. up to 99 hrs |
Temperature
| from +5°C up to +90°C |
| resolution of display for actual values |
0.1°C |
| resolution of display for setpoint values |
0,1°C |
| resolution of display/setting accuracy |
0.5°C |
Control technology
| Calibration |
three freely selectable temperature and pressure values |
Communication
| Interface |
USB-interface incl. Memmert software "Celsius" for programming and documentation of temperature and pressure |
| Documentation |
integrated ring memory as data logger for GLP-conforming long-term documentation of all relevant parameters - 1024 kB |
| Documentation |
programme stored in case of power failure |
| Programming |
chip-card control incl. 1 MEMoryCard XL with 32 kB storage capacity (max. 40 ramps) |
| Programming |
multifunctional programming via menu on 8-digit alphanumeric digital display (language to be chosen via set-up) |
Safety
| Temperature control |
automatic overtemperature protection following the setpoint-value and switching the heating off at about 3°C above setpoint value in case of failure |
| Temperature control |
additional digitally adjustable, electronic micro-processor overtemperature monitor TWW, protection class 3.3 - (max-value for overtemperature, min-value for undertemperature) |
| Temperature control |
mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature |
| AutoSAFETY |
additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature |
| Autodiagnostic system |
for fault analysis |
Heating concept
| fuzzy-supported MLC (Multi-Level-Controlling) microprocessor controller adapting its performance to the volume (local temperature sensing) |
Standard equipment
| Scope of delivery |
incl. works calibration certificate for +50°C/20 mbar |
| Door |
full-sight glass door, inside spring-loaded, 15 mm thick glazed panel in safety glass, outside with anti-splitter screen |
| Housing |
rear zinc-plated steel |
| Interior |
hermetically welded stainless steel interior of extremely corrosion-resistant stainless steel, material 1.4404 |
| Interior |
additional interior mountings of stainless steel, material 1.4404. consisting of mounting at the sides with guide bars for thermoshelves and on top (diffusor) to avoid turbulences when aerating |
| Interior |
all tubings made of stainless steel, material no. 1.4571 |
| Internals |
1 thermoshelf of aluminim, material 3.3547 (ASTM B209) with integrated large-area heating and cooling, in lowest position (cannot be removed) |
Stainless steel interior
| Max. loading of chamber: |
20 kg |
| Dimensions W x H x D in mm |
w(A) x h(B) x d(C): 385 x 305 x 250 mm |
| Volume |
29 l |
Textured stainless steel casing
| w(D) x h(E) x d(F): 550 x 600 x 650 mm |
Electrical data
| Voltage Electrical load |
230 V, 50/60 Hz
approx. 400 W |
Packing/shipping data
| the appliances must be transported upright |
| Customs tariff number |
8419 8998 |
| Country of origin |
Federal Republic of Germany |
| WEEE-Reg.-No. |
DE 66812464 |
| Dimensions approx incl. carton |
B x H x T: 660 x 870 x 590 mm |
| Net weight |
approx. 64 kg |
| Gross weight carton |
approx. 85 kg |
