MEMMERT oven dishwasher UFP800DW
Pengiriman :
3 hari sejak pembayaran
Lokasi :
Jawa Barat - Bekasi
Update Terakhir :
02-06-2016 14:59
Dapatkan Spesifikasi Harga
MEMMERT oven dishwasher UFP800DW Produk Terbaik dari
Andalan Prima General Supplier,Test & Measuring Instrument,Laboratory Equipment , Glassware & Chemical
Detail Produk
Properties
Control of standard components
| Temperature |
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value |
| Controller |
Electronic microprocessor temperature controller with auto-diagnostic system |
| Controller |
digital display of all set parameters, such as temperature, weekdays, time, fan speed, air flap position, programme status and set-up values |
| Timer |
integrated timer for tempering profiles of up to 40 ramps each, each segment adjustable from 1 min. to 999 hrs. |
| Timer |
digital 7-day programme timer with real time clock, precise minute setting, for one set value or start of ramp operation |
Temperature
| Set temperature range in °C |
min.10°C above ambient up to +250°C |
| resolution of display for actual values |
0.1°C |
| resolution of display for setpoint values |
0.1°C up to 99.9°C, 0.5°C from 100°C |
| resolution of display/setting accuracy |
0.5°C up to 99.9°C, 1°C from 100°C |
Ventilation
| Fan |
forced air circulation by 2 quiet air turbines, adjustable in 10 % steps for each segment individually |
| Fresh air admixture |
adjustment of pre-heated fresh air admixture by air flap control in 10 % steps for each segment individually |
| Vent |
vent connection with restrictor flap |
Communication
| Documentation |
integrated ring memory as data logger for GLP-conforming long-term documentation of all relevant parameters - 1024 kB |
| Documentation |
programme stored in case of power failure |
| Documentation |
parallel printer interface (incl. real time clock with date function) for all PCL3-compatible ink jet printers for GLP-conforming documentation |
| Programming |
multifunctional programming via menu on 8-digit alphanumeric digital display (language to be chosen via set-up): - tempering profiles of up to 40 ramps - time- and set-point dependent operation - air flap adjustable in 10 % steps |
Safety
| Temperature control |
independently working, digitally adjustable electronic micro-processor overtemperature monitor TWW, protection class 3.1 (max-value for overtemperature, min-value for undertemperature) |
| Temperature control |
mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature |
| AutoSAFETY |
additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature |
| Autodiagnostic system |
for fault analysis |
| Alarm |
visual and acoustic |
Standard equipment
| Scope of delivery |
incl. works calibration certificate for +80°C |
| Door |
fully insulated stainless steel door with 2-point locking (compression door lock), lockable |
| Housing |
rear zinc-plated steel |
| Interior |
easy-to-clean interior,made of stainless steel,reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides |
| Internals |
2 stainless steel grids |
Stainless steel interior
| Max. loading of chamber: |
300 kg |
| Dimensions W x H x D in mm |
w(A) x h(B) x d(C): 1040 x 1200 x 600 mm |
| Volume |
749 l |
Textured stainless steel casing
| w(D) x h(E) x d(F): 1190 x 1620 x 750 mm |
Electrical data
| 400 V, 3 phases, 50 Hz / approx. 4800 W |
Packing/shipping data
| the appliances must be transported upright |
| Customs tariff number |
8419 8998 |
| Country of origin |
Federal Republic of Germany |
| WEEE-Reg.-No. |
DE 66812464 |
| Dimensions approx incl. carton |
B x H x T: 1330 x 1910 x 1050 mm |
| Net weight |
approx. 185 kg |
| Gross weight carton |
approx. 256 kg |
