MEMMERT Constant climate chamber HPP260
Pengiriman :
3 hari sejak pembayaran
Lokasi :
Jawa Barat - Bekasi
Update Terakhir :
06-06-2016 09:22
Detail Produk
Properties
Control of standard components
| ControlCOCKPIT |
adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays |
| Temperature |
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value |
| Humidity |
humidity supply with distilled water from external tank by self-priming pump |
| Humidity |
humidity supply with distilled water from external tank by self-priming pump |
| Humidity |
humidification by hot steam generator |
| Humidity |
active humidifying and de-humidifying adjustable from 10 - 90 % rh with digital display of relative humidity - resolution of display 0.1 %, setting accuracy 0.5 % |
| Humidity |
dehumidification by cold trap using the Peltier technology |
| Timer |
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days |
Temperature
| without light: from 0°C to +70°C |
| with light: from +15°C to +40°C |
| resolution of display for setpoint and actual temperature values |
0.1°C |
Control technology
| Function HeatBALANCE |
adapting the distribution of the heating performance of the upper and lower heating circuit from -50 % to +50 % |
| Function SetpointWAIT |
the process time does not start until the set temperature is reached |
| Language setting |
German/English/Spanish/French |
| Calibration |
three freely selectable temperature values, 2-point calibration for humidity: 20 and 90 % rh |
| adjustable parameters |
temperature (Celsius or Fahrenheit), relative humidity, programme time, time zones, summertime/wintertime |
Ventilation
| forced ventilation by Peltier fan |
Communication
| Documentation |
programme stored in case of power failure |
| Programming |
AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port |
Safety
| Temperature control |
over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display |
| AutoSAFETY |
additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating function is switched off in case of overtemperature, cooling function in case of undertemperature |
| Autodiagnostic system |
integral fault diagnostics for temperature and humidity control |
| Alarm |
visual and acoustic |
Heating concept
| Heating and cooling performance distribution by individual control of the Peltier elements in the upper and lower row |
| energy-saving Peltier heating-/cooling system integrated in the rear (heat pump principle) |
Standard equipment
| Door |
fully insulated stainless steel door with 2-point locking (compression door lock) |
| Door |
inner glass door |
| Housing |
rear zinc-plated steel |
| Internals |
2 stainless steel grids |
Stainless steel interior
| Max. loading of chamber: |
200 kg |
| Dimensions W x H x D in mm |
w(A) x h(B) x d(C): 640 x 800 x 500 mm |
| Volume |
256 l |
Textured stainless steel casing
| w(D) x h(E) x d(F): 824 x 1183 x 774 mm |
Electrical data
| Voltage Electrical load |
230 V, 50/60 Hz
approx. 920 W |
| Voltage Electrical load |
115 V, 50/60 Hz
approx. 920 W |
Packing/shipping data
| the appliances must be transported upright |
| Customs tariff number |
8419 8998 |
| Country of origin |
Federal Republic of Germany |
| WEEE-Reg.-No. |
DE 66812464 |
| Dimensions approx incl. carton |
B x H x T: 930 x 1380 x 930 mm |
| Net weight |
approx. 122 kg |
| Gross weight carton |
approx. 173 kg |
