MEMMERT Humidity chamber HCP153
Pengiriman :
3 hari sejak pembayaran
Lokasi :
Jawa Barat - Bekasi
Update Terakhir :
06-06-2016 09:29
Detail Produk
Properties
Control of standard components
| Temperature |
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value |
| Humidity |
active humidifying and de-humidifying control (20-95 %) with digital display of relative humidity - resolution of display 0.5 %, setting accuracy 1 % |
| Humidity |
humidity supply with distilled water from external tank by self-priming pump |
| Humidity |
active humidifying and de-humidifying adjustable from 20-95 % rh with digital display of relative humidity - resolution of display 0.5 %, setting accuracy 1 % |
| Humidity |
humidity supply with distilled water from external tank by self-priming pump |
| Humidity |
humidification by hot steam generator |
| Controller |
digital display of all set parameters, such a temperature, weekdays, time, CO2, humidity and set-up values - language to be chosen via set-up |
| Controller |
Electronic microprocessor temperature controller with auto-diagnostic system |
| Timer |
integrated timer for tempering profiles of up to 40 ramps each, each segment adjustable from 1 min. to 999 hrs. |
| Timer |
digital 7-day programme timer with real time clock, precise minute setting |
Temperature
| resolution of display for setpoint values 0.1°C up to 99.9°C, 0.5°C from 100°C and for actual values 0.1°C (LED) |
| with humidity min. 8°C above ambient up to +90°C |
| without humidity min. 8°C above ambient up to +160°C |
Control technology
| Calibration |
three freely selectable temperature values |
Ventilation
| uniform atmosphere and temperature distribution owing to enclosed non-turbulent ventilation system in working chamber |
Communication
| Interface |
USB-interface incl. Memmert software "Celsius" for programming and documentation |
| Documentation |
integrated ring memory as data logger for GLP-conforming long-term documentation of all relevant parameters - 1024 kB |
| Documentation |
programme stored in case of power failure |
| Documentation |
parallel printer interface (incl. real time clock with date function) for all PCL3-compatible ink jet printers for GLP-conforming documentation |
| Programming |
chip-card control incl. 1 MEMoryCard XL with 32 kB storage capacity (max. 40 ramps) |
Safety
| Temperature control |
mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 10°C above nominal temperature |
| Temperature control |
overtemperature monitor TWW, protection class 3.1 or adjustable temperature limiter TWB, protection class 2, selectable on display |
| AutoSAFETY |
additionally integrated over- and undertemperature monitor "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature |
| Autodiagnostic system |
integral fault diagnostics for temperature and humidity control |
| Alarm |
with visual and acoustic alarm in case of over-/under temperature and underhumidity, open door and empty water tank |
| Alarm |
visual and acoustic |
Heating concept
| large-area multi-function heating system on four sides with additional door and back heating to avoid condensation |
Standard equipment
| Scope of delivery |
2nd chip-card (STERICard) for sterilisation of working chamber with fixed values (4 hours/160°C) without removal of sensors |
| Scope of delivery |
incl. works calibration certificate for +60°C |
| Door |
fully insulated stainless steel door with 2-point locking (compression door lock), lockable |
| Door |
inner glass door |
| Housing |
rear zinc-plated steel |
| Interior |
easy-to-clean interior,made of stainless steel,reinforced by deep drawn ribbing, material 1.4301 (ASTM 304), hermetically welded |
| Internals |
2 perforated stainless steel shelves |
Stainless steel interior
| Dimensions W x H x D in mm |
w(A) x h(B) x d(C): 480 x 640 x 500 mm |
| Volume |
153 l |
Textured stainless steel casing
| w(D) x h(E) x d(F): 630 x 938 x 650 mm |
Electrical data
| Voltage Electrical load |
230 V, 50/60 Hz
approx. 1500 W |
Packing/shipping data
| the appliances must be transported upright |
| Customs tariff number |
8419 8998 |
| Country of origin |
Federal Republic of Germany |
| WEEE-Reg.-No. |
DE 66812464 |
| Dimensions approx incl. carton |
B x H x T: 830 x 1300 x 800 mm |
| Net weight |
approx. 80 kg |
| Gross weight carton |
approx. 106 kg |
