The Primo is ideally suited to the rigorous demands of water quality professionals who will appreciate the practicality of the clear, easy to read LCD for demonstrating the before and after results of conditioning and filtration systems.
Key features
- Robust pocket-sized tester
- Direct probe connection
- Automatic calibration
- Automatic Temperature Compensation
Operation and maintenance are straightforward
Operate
- The Primo uses a single button at the top of the meter.
- Press the button once and the meter is powered and ready for use.
Calibrate
- Simply press and hold the button for a few seconds and the meter automatically enter calibration mode.
- Open a sachet of Hanna calibration solution and dip the probe directly into the sachet.
- Within seconds the meter recognises the calibration solution and will calibrate itself.
Temperature is compensated automatically to ensure the readings are consistent with standard or reference temperature.
Supplied with
- Batteries
- Instructions
Calibration solution
- HI 70032P
-
Range 0 to 1999 ppm (mg/L) Resolution 1 ppm (mg/L) Accuracy ±2% F.S. Calibration Solution HI 70032P Calibration automatic, at 1382 ppm Temperature Compensation Automatic, 0 to 60°C (32 to 140°F), ß=2%/°C Battery Type / Life 2 x 1.5V / approx. 200 hours; auto-off after 5 minutes of non-use Environment 0 to 50°C (32 to 122°F); RH max 95% Dimensions 180 x 50 x 25 mm (7.1 x 2.0 x 1.0") Weight 50 g (1.8 oz.)