pH/ORP control is easy with the Alpha pH 200 limit controllers. Featuring 6 sub-menus accessible via a four-button keypad for quick, easy setup and calibration, the controller/transmitters also come with two levels of password to protect against unauthorised tampering.
For heightened security, use the Alpha pH 200 limit controller which only allows access to calibration and set-up menus via passwords.
| :: | Easy push-button calibration with USA/NIST buffer recognition for fast, effortless calibration. Controller freezes data transmission and relay activities during calibration and maintenance |
| :: | Symmetrical mode of operation for clear, uninterrupted readings even in electronically noisy environments |
| :: | Two SPDT relays with independent hysteresis – effective high/low set-points limit control with minimal relay-chattering |
| :: | Choice of automatic or manual temperature compensation. Three-wire system compensates error due to cable resistance |
| :: | 85 to 250 VAC. 50/60 Hz or DC variable input allows controller to be used with a wide range of supply voltages |
| :: | Full-scale 4 to 20 mA galvanically isolated current output for process control |
Specifications
|
Product Specification |
Description |
| pH | |
| Range | 0.00 to 14.00 pH |
| Resolution | 0.01 pH |
| Accuracy | ±0.01 pH |
| ORP | |
| Range | -999 to 1000 mV |
| Resolution | 1 mV |
| Accuracy | ±2 mV |
| Temperature | |
| Range | -10 to 110 ºC |
| Resolution | 0.1 ºC |
| Accuracy | ±0.5 ºC |
| Sensor | Pt100; 2 or 3 wire |
| Compensation | Auto/manual (0 to 100 ºC) |
| Set Point And Controller Functions | |
| Set point 1 (SP1)/ set point 2 (SP2) |
0.00 to 14.00 pH or -999 to 1000 mV |
| Switching pH Hysteresis | 0.00 to 2.00 pH |
| Switching ORP Hysteresis | 0 to 300 mV |
| Function | Limit control |
| Contact Outputs | 2 SPDT relays |
| Switching Voltage/ Current/Power | Max. 250 VAC / max. 3 A / max. 600 VA |
| Electrical Data And Connections | |
| Transmitter Function | 4 to 20 mA scalable outputs for pH/ORP, galvanically isolated |
| Load | 200 Ohm |
| pH/ORP Input | BNC (1012 impedance); asymmetrical/symmetrical |
| Connection Terminal | 3-pin, 7-pin & 9-pin terminal, detachable blocks |
| Display | |
| LED | 7 segments display |
| Power Supply | |
| Input | 85 to 250 VAC, 50/60 Hz |
| Main Fuse | 250 mA, anti-surge, S504 Bussman |
| EMC Specifications | |
| Emitted Interference | According to EN 61326 |
| Immunity To Interference | According to EN 61326 |
| Environmental Conditions | |
| Operating Temperature Range | -10 to 50 ºC |
| Max. Relative Humidity | 10 to 95 % (non-condensing) |
| Mechanical Specifications | |
| Dimensions (WxHxD) | 96 x 48 x 150 mm |
| Weight | 300 g (unit) / 350 g (packed) |
| Ingress Protection | IP50 |