Fluke 1AC II A1 VoltAlertTM Electrical Tester 5PK
Pengiriman :
3 hari sejak pembayaran
Lokasi :
Jawa Barat - Bekasi
Update Terakhir :
15-09-2016 11:31
Detail Produk
Features
- Voltbeat™ technology and continuous self-test – so you always know it's working
- Upon detection, tip glows and beeper sounds
- CAT IV 1000 V for added protection
- Expanded range: 90 V AC to 1000 V AC
- 20 V to 90 V AC control circuit model also available
- Two-year warranty
- Batteries included
- On/Off Button
- Audible/Silent
- 5 pack
| Specifications |
| Operating principles |
Senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage. |
| Voltage sensing ranges |
Nominally, 90 V AC to 1000 V AC |
| Detector tip style |
Flat-tip |
| Light source |
One high intensity red LED |
| Agency approvals |
c CSA us, CE, C-Tick |
| Safety rating |
1000 V, CAT IV |
| Safety compliance |
Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01 Pollution Degree 2 |
| EMC compliance |
Meets IEC 61326-1:2006 |
| IP rating |
IP 40 |
| Operating temperature |
-10°C to 50°C (-14°F to 122°F) |
| Operating humidity ranges |
0% to 95% (0°C to 30°C) |
| 0% to 75% (30°C to 40°C) |
| 0% to 45% (40 to 55°C) |
| Operating altitude |
3000 m |
| Cleaning |
Clean with damp cloth |
| Batteries |
2 AAA alkaline batteries included |
| Battery life |
Typical battery life of greater than 1 year |
| Warranty period |
Two years |
