JENCO 6313 pH, ORP, Temperature In-line Analyzer
Pembelian Minimal :
1 unit
Pembelian Maksimal :
1 unit
Pengiriman :
1 hari sejak pembayaran
Lokasi :
Jawa Barat - Bekasi
Update Terakhir :
03-02-2016 15:16
Detail Produk
- Clear LCD displays pH or mV, with temperature and relay status simultaneously.
- Automatic buffer recognition of US and NIST buffer sets. Calibration data is stored in memory and is ready for use on power up.
- Displays absolute and relative ORP.
- Isolated and reversible 4-20 mA current output for pH or ORP allows it to be used as a proportional output.
- 2 programmable on/off relays: 2 for pH or ORP.
- CE Approved
- Password protection.
- IP65
Specifications
-
| pH |
-2.00 to 16.00ph |
0.01pH |
±0.01%±1 digit |
| mV(absolute /relative) |
-2500 to +2500mV /-6499 to +6499mV |
1mV /1mV |
±0.01%±1 digit |
| Temperature |
-10.0 to 120.0°C |
0.1°C |
±0.2°C |
General
- pH Buffer Recognition (4.01 ,7.00 ,10.01) or NIST (4.00,6,86,9.18), user selectable
- pH Electrode Offset Recognition: ±100mV at pH 7.00 /-91.7mV to +108,3mV at pH 6.86
- pH Electrode Slope Recognition: ±30% at pH 4,00 , 4,01 ,9.18 or 10.01
- Temperature Compensation: Auto -10.0 to 120.0°C(Thermistor , 10K ohm /Resisotr,Balco 3K ohm at /RTD, PT-1000 )
- Input Impedance: >10(exp)13 ohms
- Input Select: User selectable pH or ORP
- Current Output Range: 4 to 20 mA(isolated),programmable span
- Current Output Scale User programmable ,linear
- Maximum Load: 500 ohm
- Isolation Voltage: 500V DC
- Control Type: 2 ON/OFF controls
- Relay Output: 5A at 115V AC or 2.5A at 220V AC, resistive load only
- Security: 4-dight password
- Power :115 V AC or 230V AC at 50/60 HZ
- Ambient Temperature Range: From 0 to 50 °C
- Weight/Case: 940 grams / IP 65 ,1/4 DIN case, 148mm depth
