JENCO 3679N pH, ORP In-line Controller

Harga :

Rp. 1 / unit

Merk :

JENCO

Pembelian Minimal :

1 unit

Pembelian Maksimal :

1 unit

Pengiriman :

1 hari sejak pembayaran

Lokasi :

Jawa Barat - Bekasi

Dilihat :

94 Kali

Update Terakhir :

03-02-2016 15:26

Detail Produk

Description

1/4 DIN panel mount pH/ORP controller/transmitter in a waterproof IP-65 enclosure. Features, LCD display, dual SPDT Hi/Lo relays, manual set point adjust and pH calibration via potentiometers. For ORP there is a Zero Adjustment and pH/ORP is selectable via a shorting plug. Output is 4-20 mA current type. Connectors are a spade lug circular connector for pH+. All other connections are tinned leads to terminal blocks. Temperature compensation is a Pt-100 ATC or simulation resistor. Power 115/230V AC.

Dual function pH & ORP
Orp zero point calibration
Isolated 4~20ma output
Dual on/off relays
Auto temperature compensation
Water & corrosion proof case
Large LCD display

Specifications

	RANGE	RESOLUTION	ACCURACY
pH	0.00 to 14.00 pH	0.01 pH	0.1% ± 1 LSD
ORP	-1999 to 1999 mV	1 mV	0.05% ± 1 LSD

Outputs
- Relays output (max.): 5amp. at 115VAC, 2.5 amp. at 230 VAC,resistive lo
- Relay hysteresis pH/ORP: ±0.1ph/±10 mV
- Isolated 4~20mA output range: Over imput span
- Accuracy: 0.1 % of span
- Isolation voltage: 500VDC max.
- Load resistance: 500 ohm max.
Controller Input Range
- Relay outputs: Over imput span
- Current output pH/ORP: 0.00~14.00ph / 0~1400mV
General
- Input impedance: >= 10exp(13) ohm
- Temperature compensation: Auto 0 to 100°C
- Temperature sensor: Pt-100, a=0.00385
- pH zero point control: ±2.0 pH
- ORP zero point control: ±100mV
- Display: 12.7 mm high LCD
- Power: 115VAC, 230VAC ±15%, 50/60 hz
- Weight: 910 gm
- Dimension: 96mm (l) x 96mm (w) x 171mm (d)
- Cutout size: 92 mm x 92 mm

Andalan Prima

JENCO 3679N pH, ORP In-line Controller

Detail Produk

Description

Specifications

Outputs

Controller Input Range

General

Permintaan Penawaran

Kategori Produk

Link