The KEW 6201A is a portable appliance tester, performing four functions to ensure the Safety of ClassI and ClassII appliances. And also can measure the mains voltage.
Readings are displayed on a large liquid crystal display (LCD) below which are four LEDs which unambiguously display a pass or fail indication for threshold values dictated by AS/NZS 3760.
This instrument is suitable for performing tests as required by the following standards.
AS/NZS 3760 In-service safety inspection and testing of electrical equipment.
RPE 20Ω Protective Conductor Resistance Test
Measuring range
0 - 15.00Ω
Resolution of measurement
10mΩ
Open circuit voltage
< AC 12V
Measuring current
10A AC nominal value
Accuracy
±3%rdg±5dgt
RINS 200MΩ Insulation Resistance
Rating
250V/20MΩ
500V/20MΩ
Measuring range
0 - 19.99Ω
Resolution of measurement
10kΩ
Output voltage
250V DC (+20%/-10%) @1MΩ
500V DC (+20%/-10%) @1MΩ
Short circuit current
2.5mA DC or less
Accuracy
±2%rdg±3dgt
Leakage Current Test
Measuring range
AC 0.1 - 19.99mA
Resolution of measurement
0.01mA
Examination time
Max 15 seconds
Accuracy
±3%rdg±5dgt
AC VOLT Mains Voltage Check
Measuring range
207 - 264V
Resolution of measurement
1V
Accuracy
±2%rdg±3dgt
Supply voltage
240V±10%
Frequency
50Hz±1%
Applicable standards
IEC 61010-1 CAT III 300V Pollution Degree2
IEC 61326-1 (EMC)
Dimensions
185 (L) × 167 (W) × 89 (D) mm
Weight
1.2kg (only the instrument body)
Accessories
7123 (Power cord [AU])
7129A (Test leads with alligator clip)
7161A (Flat test prod [black])
7140 (Adapter for exntesion cord)
9147 (Cord case)
9121 (Shoulder strap)
Instruction manual
